The compact MDM 4 tabletop unit allows the user to take the step from manual to mechanical dosing, mixing and application. The system can be adjusted to output rates from 50 to 800 ml/min by using different pump combinations and depending on the mixing ratio and viscosity of the components. It is suitable for the realization of dosing ratios from 100:10 to 10:100, whereby the output can be adjusted via a potentiometer. The MDM 4 uses a compact LC 0/2 from TARTLER as mixing head. Its rotating one-way mixer is driven by a frequency-controlled electric motor via a flexible shaft. For the containers for the A and B components, the user can choose between containers with volumes of 0.5 to 100 liters The MDM 4 also requires only a 220 V connection for commissioning.
Higher output, more functions
For plastics processors who require variable output rates of 0.05 to 1.5 l/min in lamination technology and want more equipment functions, TARTLER recommends its MDM 5. This system can be used both stationary and mobile and allows the liquid polyurethane and epoxy resins to be applied by pouring, spraying or foaming. The Siemens Logo control offers numerous practical features such as pre-selection of the firing time, a pot life alarm and much more. The MDM 5 can also be equipped with different sized containers, electric agitators and various heaters for containers, hoses and mixing head. Also of special note: It can be equipped with different mixing heads from the large TARTLER range! In addition to the 220 V mains connection, the MDM 5 requires a compressed air connection (6-8 bar).
The MDM 6 is the top model in TARTLER’s compact system series. It can also be used both stationary and mobile, and is designed for outputs of up to 3.5 l/min. In addition to numerous other features and functions, its control system also offers the possibility of performing small and large recirculation of the components. The MDM 6 is also suitable for pouring, spraying and foaming. It can be operated with containers with volumes from 3.0 l to 100 l.
Would you like a little more?
With the systems of its MDM series, TARTLER offers four innovative solutions for dosing, mixing and applying small quantities of liquid polyurethane and epoxy resins in the context of laminating technology. Since all units are also integrated into the modular range of the German plant manufacturer, they can be optimally adapted to changing requirements with numerous add-on components – for example, with chassis, refill kits, and heating and degassing systems. In addition, TARTLER supports its customers through the entire journey to next level of mechanical and finally automated resin processing.