Our mixer assortment

The extensive TARTLER mixer range has been developed to meet the most diverse requirements – and will be expanded as required. We are the only machine manufacturer who produces mixers with in-house molds. In this way, we enable our customers to achieve an optimal mixing of their materials – whether they are to be mixed and filled in high viscosity, low viscosity, liquid or in extreme ratios (100:2, 100:10). Made in Germany.

The special thing about our dynamic disposable mixers is the stability at their core. They can absorb more torsional forces than the products of our competitors.

Explanation of the mixer designations

13/12 (example for mixer key)13 mm inner diameter in pipe / 12 = number of mixer elements
DDynamic
IInitiator (speed monitoring), shortcut: Ini
AScraper at mixer inlet / mixer head outlet for materials that tend to form agglomerates
KCone (for possible closure of the mixer outlet after the end of the shot (expanding systems) or for thixotropic adhesives / synthetic resins that would clog the mixer outlet)
CSelf-cutting mixer connection
DHSleeves (mixer sleeves)
TNozzle (hose nozzle connection)
IMInitiator at mixer input (speed monitoring)
IMHInitiator at mixer output (speed monitoring)
SHose connection to mixer sleeve

Mixer with self-cutting connection

Introduction: Self-cutting mixer connection

The self-cutting mixer connection developed and patented by us is intended to replace the conventional connection with drive hook in the long term. A mixture of screw and corkscrew turns into the mixer and can be released again with the opposite direction of rotation. This increases work safety for the operator and completely eliminates the potential risk of injury from the drive hook. As the mixer does not have to be hooked into a hook, it is also possible to automate the mixer change. Cleaning and changing a cured mixer are also easier than with the previous model.

  • Mixer 06/12
    Mixer 06/12
    Mixers (self-cutting)
  • Mixer 08/12
    Mixer 08/12
    Mixers (self-cutting)
  • Mixer 10/12
    Mixer 10/12
    Mixers (self-cutting)
  • Mixer 13/12
    Mixer 13/12
    Mixers (self-cutting)
  • Mixer 22/04
    Mixer 22/04
    Mixers (self-cutting)
Mixer 06/12
  • For small output ranges
  • Low viscosities

We select the right mixer for you depending on materials (viscosity, density, mixing ratio), output and application.

If the desired result requires a further development of the mixer, we have the possibility to develop a new mixer type for you, as we produce our mixers ourselves.

Categories :
Mixers (self-cutting)
Mixer 08/12
  • For small to medium output ranges
  • Low to higher viscosity liquid components

 

We select the suitable mixer for you depending on materials (viscosity, density, mixing ratio), output and application.

If the desired result requires further development of the mixer, we have the possibility to develop a new mixer type for you, as we produce our mixers ourselves.

Categories :
Mixers (self-cutting)
Self cutting mixer – 10/12 C D
Self cutting mixer – 10/12 C D
Mixer 10/12
  • For small to medium output ranges
  • Low to higher viscosity liquid components

 

We select the suitable mixer for you depending on materials (viscosity, density, mixing ratio), output and application.

If the desired result requires further development of the mixer, we have the possibility to develop a new mixer type for you, as we produce our mixers ourselves.

Categories :
Mixers (self-cutting)
Self cutting mixer – 13/12 C DI
Self cutting mixer – 13/12 C DI
Self cutting mixer – 13/12 C DT (heat resistant up to 200°C)
Self cutting mixer – 13/12 C DT (heat resistant up to 200°C)
Self cutting mixer – 13/12 C D (heat resistant up to 200°C)
Self cutting mixer – 13/12 C D (heat resistant up to 200°C)
Self cutting mixer – 13/12 C D LC6 (heat resistant up to 200°C)
Self cutting mixer – 13/12 C D LC6 (heat resistant up to 200°C)
Mixer 13/12
  • For medium to high output ranges
  • Low viscosity to pasty components

We select the right mixer for you depending on materials (viscosity, density, mixing ratio), output and application.

If the desired result requires a further development of the mixer, we have the possibility to develop a new mixer type for you, as we produce our mixers ourselves.

Categories :
Mixers (self-cutting)
Mixer 22/04
  • For medium to high output ranges
  • Low viscosity to pasty components

 

We select the right mixer for you depending on materials (viscosity, density, mixing ratio), output and application.

If the desired result requires a further development of the mixer, we have the possibility to develop a new mixer type for you, as we produce our mixers ourselves.

Categories :
Mixers (self-cutting)

Which mixing heads are suitable?

Check out the matching mixing heads with self-cutting mixer connection.

Mixer with conventional connection

Introduction: conventional mixer connection with drive hook

With this type of mixer connection, the mixer is hooked into the drive hook of the mixing head. This hook spins, causing the mixer to rotate, and in this way enables dynamic mixing of the materials in the mixer sleeve.

This principle, in which the material is mixed very homogeneously by the rotating mixing spiral immediately before ejection, is a TARTLER invention and has set the standard in resin processing since 1990. We manufacture our mixers in numerous widths and lengths with different spiral geometries.

Furthermore, variants with additional functional components are available:

  • with scraper for materials that tend to form agglomerates
  • with cone for quick closure of the mixer outlet after each end of the shot
  • with integrated pulse generator (Ini) for speed monitoring
  • for processing materials with a temperature of up to 200° C
  • Mixer 06/12
    Mixer 06/12
    Mixers (for drive hook)
  • Mixer 08/12
    Mixer 08/12
    Mixers (for drive hook)
  • Mixer 10/12
    Mixer 10/12
    Mixers (for drive hook)
  • Mixer 13/12
    Mixer 13/12
    Mixers (for drive hook)
  • Mixer 22/04
    Mixer 22/04
    Mixers (for drive hook)
  • Mixer 22/06
    Mixer 22/06
    Mixers (for drive hook)
  • Mixer 35/04
    Mixer 35/04
    Mixers (for drive hook)
  • Mixer 35/08
    Mixer 35/08
    Mixers (for drive hook)
Mixer 06/12
  • For small output ranges
  • Low viscosities

We select the right mixer for you depending on materials (viscosity, density, mixing ratio), output and application.

If the desired result requires a further development of the mixer, we have the possibility to develop a new mixer type for you, as we produce our mixers ourselves.

Categories :
Mixers (for drive hook)
Mixer 08/12
  • For small to medium output ranges
  • Low to higher viscosity liquid components

We select the right mixer for you depending on materials (viscosity, density, mixing ratio), output and application.

If the desired result requires a further development of the mixer, we have the possibility to develop a new mixer type for you, as we produce our mixers ourselves.

Categories :
Mixers (for drive hook)
Mixer 10/12
  • For small to medium output ranges
  • Low to higher viscosity liquid components

We select the right mixer for you depending on materials (viscosity, density, mixing ratio), output and application.

If the desired result requires a further development of the mixer, we have the possibility to develop a new mixer type for you, as we produce our mixers ourselves.

Categories :
Mixers (for drive hook)
Mixer 13/12
  • For small to medium output ranges
  • Low to higher viscosity liquid components

 

We select the right mixer for you depending on materials (viscosity, density, mixing ratio), output and application.

If the desired result requires a further development of the mixer, we have the possibility to develop a new mixer type for you, as we produce our mixers ourselves.

Categories :
Mixers (for drive hook)
Mixer – 22/04 DS DN25
Mixer – 22/04 DS DN25
Mixer – 22/04 DS DN19
Mixer – 22/04 DS DN19
Mixer – 22/04 DIS DN19
Mixer – 22/04 DIS DN19
Mixer – 22/04 DI DN19
Mixer – 22/04 DI DN19
Mixer – 22/04 D DN19
Mixer – 22/04 D DN19
Mixer 22/04
  • For medium to high output ranges
  • Low viscosity to pasty components

We select the right mixer for you depending on materials (viscosity, density, mixing ratio), output and application.

If the desired result requires a further development of the mixer, we have the possibility to develop a new mixer type for you, as we produce our mixers ourselves.

Categories :
Mixers (for drive hook)
Mixer 22/06
  • For medium to high output ranges
  • Low viscosity to pasty components

We select the right mixer for you depending on materials (viscosity, density, mixing ratio), output and application.

If the desired result requires a further development of the mixer, we have the possibility to develop a new mixer type for you, as we produce our mixers ourselves.

Categories :
Mixers (for drive hook)
Mixer 35/04
  • For medium to high output ranges
  • Especially for highly viscous and pasty components

We select the right mixer for you depending on materials (viscosity, density, mixing ratio), output and application.

If the desired result requires a further development of the mixer, we have the possibility to develop a new mixer type for you, as we produce our mixers ourselves.

Categories :
Mixers (for drive hook)
Mixer 35/08
  • For medium to high output ranges
  • Especially for highly viscous and pasty components

We select the right mixer for you depending on materials (viscosity, density, mixing ratio), output and application.

If the desired result requires a further development of the mixer, we have the possibility to develop a new mixer type for you, as we produce our mixers ourselves.

Categories :
Mixers (for drive hook)

Which mixing heads are suitable?

Check out the matching mixing heads with conventional mixer connection (drive hook).

We are happy to advise you!

Tim Brockmann

Head of technical sales & project management
Phone: +49 (0)6061 9672-46
t.brockmann@tartler.com

We are happy to advise you!

Tim Brockmann

Head of technical sales & project management
Phone: +49 (0)6061 9672-46
t.brockmann@tartler.com

Always up-to-date with the TARTLER News!