- Nodopox 50 V
- Nodopox 50 V-TD-2K TAVA 50 D
- Nodopox 200 VS V-TD-2K TAVA 200 D
- Nodopox 200 VS V AR 2K
- Nodopox 200 VS 1K TAVA 200 F
Nodopox 50 V | 2K Meter Mix and Dispense Machine
Dosing system for the efficient processing of pasty, two-component synthetic resins with vacuum-assisted drum change
System for processing polyurethane resin or epoxy resin with an output of tooling pastes up to 5 kg/min and adhesive pastes up to 10 kg/min (depending on viscosity, mixing ratio and tube lengths).
Advantages of vacuum-assisted drum change:
+ High level of user-friendliness
+ Vacuum-supported following plate deaeration
+ No loss of material
The sink down of the following plate is a result of the extraction of air between the following plate and the material surface in the drum.
Technical data
| Applications |
|
|---|---|
| Metering pump drive | Frequency controlled electric motor or servo motor 0.37 up to 1.5 kW |
| Mixing ratio |
|
|
|
| Control |
|
| Tank | 50 l drum for A and B |
| Vacuum Drum | Fixing the supplier drum for vacuum drum change |
| Heating | Available for tanks, hose and mixing head |
| Compressed air | 400–1200 l/min, 6–8 bar |
| Power supply | 400 Volt, 50 Hz |
| Hose length | 3 m, 5 m, 10 m or special length |
| Mixing head |
|
| Weight | 540-900 kg |
| Additional equipment |
|
Download Datasheet 
Nodopox 50 V TD 2K TAVA 50 D | 2K Meter Mix and Dispense Machine with vacuum drum
Dosing system for the efficient processing of pasty, two-component synthetic resins
System for processing polyurethane resin or epoxy resin with an output of tooling pastes up to 5 kg/min and adhesive pastes up to 10 kg/min (depending on viscosity, mixing ratio and tube lengths).
Equipment with vacuum drum
+ High user-friendliness
+ No loss of material
+ No contamination of operator
+ Maximum process reliability
+ No introduction of air when changing drum
We produce a vacuum between material surface in the drum and the following plate. The vacuum can be specified in the machine program. The sink down of the following plate is in a controlled way, and only if the specified vacuum is reached. So absolutely no introduction of air is coming into the process!
Nodopox 200 VS V TD 2K TAVA 200 D | 2K Meter Mix and Dispense Machine with vacuum drum
Dosing system for the efficient processing of high viscosity synthetic resins in large quantities
System for processing polyurethane resin or epoxy resin with an output of tooling pastes up to 5 kg/min and adhesive pastes up to 10 kg/min (depending on viscosity, mixing ratio and tube lengths).
Equipment with vacuum drum
+ High user-friendliness
+ No loss of material
+ No contamination of operator
+ Maximum process reliability
+ No introduction of air when changing drum
We produce a vacuum between material surface in the drum and the following plate. The vacuum can be specified in the machine program. The sink down of the following plate is in a controlled way, and only if the specified vacuum is reached. So absolutely no introduction of air is coming into the process!
Nodopox 200 VS V AR 2K | 2K Meter Mix and Dispense Machine with vacuum supported follower plate deaeration
Dosing system for the efficient processing of high viscosity synthetic resins in large quantities
System for processing polyurethane resin or epoxy resin with an output of up to 15 kg/min (depending on viscosity, mixing ratio and tube lengths).
Benefits of vacuum supported drum change
+ Highly user-friendly
+ Vacuum supported follower plate deaeration
+ No loss of material
The sink down of the following plate is a result of the extraction of air between the following plate and the material surface in the drum.
Nodopox 200 VS 1K TAVA 200 F | 1K metering machine for pasty components with vacuum filling station
Dosing system with vacuum drum (TAVA 200 F) for a air-free filling of single component pasty resins
System for processing polyurethane resin or epoxy resin with an output of up to 20 l/min (depending on viscosity, mixing ratio and tube lengths).
Equipment with vacuum drum
+ High user-friendliness
+ No loss of material
+ No contamination of operator
+ Maximum process reliability
+ No introduction of air when changing drum
We produce a vacuum between material surface in the drum and the following plate. The vacuum can be specified in the machine program. The sink down of the following plate is in a controlled way, and only if the specified vacuum is reached. So absolutely no introduction of air is coming into the process!