Mixing heads

Our mixing heads are designed and manufactured in-house. This way we can guarantee the supply of the perfect mixing head for every application: Adapted to the material, the required flow rate and the connected machine.

Thanks the cooperation with the ZT Odenwald GmbH (part of the TARTLER GROUP), which performs all turning and milling work for us, we can manufacture all parts 100% in-house and deliver maximum quality assurance.

Our mixing heads are easy to handle and are characterized by gentle material processing and increased process reliability in everyday production thanks to modern sensor technology. In addition, they can be equipped with temperature sensors and allow – if required by the application or material used – the connection of heating cartridges. They can be used for conventional static mixing as well as for high-quality dynamic mixing with the disposable plastic rotary mixer developed by us.

Another special feature of our mixing heads is that mixing only takes place in the mixer itself. This means there is no need to flush any spaces and there is no risk of it clogging with mixed material.

We recommend the use of our dynamic mixer, which enables perfect mixing, even with extreme differences in the viscosity of the components and/or challenging mixing ratios. As a disposable product, the plastic mixer is disposed of after use with the hardened material residues adhering to it – no need to use environmentally harmful rinsing agents. We have also developed special mixers for a number of individual applications – always with the aim of achieving the best possible result.

Below you will find an overview of our mixing heads – with conventional mixer connection, drive hook or with our patented self-cutting connection for the dynamic mixer element.

Mixing heads withs self-cutting mixer connection (patented)

The self-cutting mixer connection developed and patented by us has many advantages over the conventional drive hook.

  • Automated mixer change is possible
  • Easy cleaning
  • Problem-free mixer change even with cured mixer
  • Higher work safety due to improved shaft geometry
  • Low maintenance, as sealing only against A-component
  • More stable, low-maintenance design
  • Easy and safe maintenance assembly
  • Mixing head LC 5/X Rezi
    Mixing head LC 5/X Rezi
    Mixing heads (self-cutting connection)
  • Mixing head LC 5/X
    Mixing head LC 5/X
    Mixing heads (self-cutting connection)
  • Mixing head LC 6/X
    Mixing head LC 6/X
    Mixing heads (self-cutting connection)
  • Mixing head LC 7/3 Rev.02
    Mixing head LC 7/3
    Rev.02
    Mixing heads (self-cutting connection)
  • Mixing head LC 7/X
    Mixing head LC 7/X
    Mixing heads (self-cutting connection)
  • Mixing head LC 9/X
    Mixing head LC 9/X
    Mixing heads (self-cutting connection)
LC 5/X Rezi with valves for component recirculation
LC 5/X Rezi with valves for component recirculation
Mixing head LC 5/X Rezi
  • Self-cutting system with its advantages
  • Mixing head for up to 4 components incl. recirculation function of the valves
  • Valves are individually replaceable
  • Air motor drive (electric motor possible)
  • Different valve sizes possible
Categories :
Mixing heads (self-cutting connection)
LC 5/X with self-cutting mixer connection
LC 5/X with self-cutting mixer connection
Mixing head LC 5/X
  • Self-cutting system with its advantages
  • mixing head for up to 4 components
  • Valves are individually replaceable
  • Air motor drive (electric motor possible)
  • Different valve sizes possible
Categories :
Mixing heads (self-cutting connection)
LC 6/X with self-cutting mixer connection
LC 6/X with self-cutting mixer connection
Mixing head LC 6/X
  • Self-cutting system with its advantages
  • mixing head for up to 6 components
  • Valves are individually replaceable
  • Air motor drive (electric motor possible)
  • Different valve sizes possible
Categories :
Mixing heads (self-cutting connection)
Mixing head LC 7/3 Rev. 02 with self-cutting mixer connection
Mixing head LC 7/3 Rev. 02 with self-cutting mixer connection
Mixing head LC 7/3
Rev.02
  • Self-cutting system with its advantages
  • Mixing head for up to 3 components
  • Electric motor for high output
  • for high viscosity A and medium viscosity B components
  • Material-friendly application
  • Preparation for temperature sensor, heating cartridge and pressure sensor
Categories :
Mixing heads (self-cutting connection)
LC 7/X with self-cutting mixer connection
LC 7/X with self-cutting mixer connection
Mixing head LC 7/X
  • Self-cutting system with its advantages
  • Mixing head for up to 6 components
  • Valves are individually replaceable
  • Air motor drive (electric motor possible)
  • Different valve sizes possible
  • For high viscosity A and medium viscosity B components
Categories :
Mixing heads (self-cutting connection)
Mixing head LC 9/X
Mixing head LC 9/X
Mixing head LC 9/X
  • Self-cutting system with its advantages
  • mixing head for up to 2 components
  • Valves are individually replaceable
  • Air motor drive (electric motor possible)
  • Different valve sizes possible
  • For high viscosity A and medium viscosity B components
Categories :
Mixing heads (self-cutting connection)

Which mixers go with it?

Have a look at the suitable mixers for mixing heads with the self-cutting mixer connection we have developed.

Mixing heads with conventional mixer connection (drive hook)

With standard connection, the mixer is hooked into the drive hook of the mixing head. This hook spins, causing the mixer to rotate, and in this way enables dynamic mixing of the materials in the mixer sleeve.

This principle, in which the material is mixed very homogeneously by the rotating mixing spiral immediately before ejection, is a TARTLER invention and has set the standard in resin processing since 1990. We manufacture our mixers in numerous widths and lengths with different spiral geometries.

Conventional mixer connection for hooking a mixer
  • Mixing head LC 0/2
    Mixing head LC 0/2
    Mixing heads (conventional connection)
  • Mixing head LC 5/2 Rev. 01
    Mixing head LC 5/2
    Rev. 01
    Mixing heads (conventional connection)
  • Mixing head LC 5/3 Rev. 01
    Mixing head LC 5/3
    Rev. 01
    Mixing heads (conventional connection)
  • Mixing head LC 5/3 flat
    Mixing head LC 5/3 flat
    Mixing heads (conventional connection)
  • Mixing head LC 5/3 Mini
    Mixing head LC 5/3 Mini
    Mixing heads (conventional connection)
  • Mixing head LC 5/4
    Mixing head LC 5/4
    Mixing heads (conventional connection)
  • Mixing head LC 5/4 Rezi
    Mixing head LC 5/4 Rezi
    Mixing heads (conventional connection)
  • Mixing head LC 6 easy Rev. 01
    Mixing head LC 6 easy Rev. 01
    Mixing heads (conventional connection)
  • Mixing head LC 7/3 Rev. 01
    Mixing head LC 7/3
    Rev. 01
    Mixing heads (conventional connection)
  • Mixing head LC 8/2
    Mixing head LC 8/2
    Mixing heads (conventional connection)
  • Mixing head LC 9/3
    Mixing head LC 9/3
    Mixing heads (conventional connection)
Mixing head LC 0/2
Mixing head LC 0/2
Mixing head LC 0/2
Mixing head LC 0/2
Mixing head LC 0/2 with MDM 4
Mixing head LC 0/2 with MDM 4
Mixing head LC 0/2

Designed for medium discharge quantities, same viscosity and mixing ratio. Characterized by the light, compact and very low maintenance design.

Categories :
Mixing heads (conventional connection)
Mixing head LC 5/2 Rev. 01
Mixing head LC 5/2 Rev. 01
Mixing head LC 5/2
Rev. 01

The LC 5 series is optimized for small quantities and is characterized by a low volume in the valve. This enables us to achieve a high flow rate with low output. In the current version we have optimized the material access to avoid the formation of air bubbles.

  • Mixing head for max. 2 components
  • Lightweight design
  • Air motor drive (electric motor possible)
  • Different valve sizes possible
  • Further modification such as strain relief, heating, temperature detection, pressure detection
Categories :
Mixing heads (conventional connection)
LC 5/3 for up to 3 components
LC 5/3 for up to 3 components
Mixing head LC 5/3
Rev. 01

The LC 5 series is optimized for small quantities and is characterized by a low volume in the valve. This enables us to achieve a high flow rate with low output. In the current version we have optimized the material access to avoid the formation of air bubbles.

  • Mixing head for up to 3 components (2 components and purge air)
  • Air motor drive (electric motor possible)
  • Different valve sizes possible
Categories :
Mixing heads (conventional connection)
LC 5/3 flat for up to 3 components
LC 5/3 flat for up to 3 components
Mixing head LC 5/3 flat

The LC 5 series is optimized for small quantities and is characterized by a low volume in the valve. This enables us to achieve a high flow rate with low output. In the current version we have optimized the material access to avoid the formation of air bubbles.

  • Mixing head for up to 3 components (2 components and purge air)
  • Air motor drive (electric motor possible)
  • Different valve sizes possible
  • With smooth material outlet to the mixer for even easier cleaning
Categories :
Mixing heads (conventional connection)
LC 5/3 for small shot sizes
LC 5/3 for small shot sizes
Mixing head LC 5/3 Mini

The LC 5 series is optimized for small quantities and is characterized by a low volume in the valve. This enables us to achieve a high flow rate with low output. In the current version we have optimized the material access to avoid the formation of air bubbles.

  • for smallest quantities and small shot sizes
  • Mixing head for up to 3 components (2 components and purge air)
  • Air motor drive (electric motor possible)
  • Different valve sizes possible
Categories :
Mixing heads (conventional connection)
LC 5/4 with 4K attachment allows in total up to 8 components
LC 5/4 with 4K attachment allows in total up to 8 components
LC 5/4 for up to 4 components
LC 5/4 for up to 4 components
LC 5/4 with 4K attachment, disassembled
LC 5/4 with 4K attachment, disassembled
4K attachment front
4K attachment front
4K attachment rear side
4K attachment rear side
Mixing head LC 5/4

The LC 5 series is optimized for small quantities and is characterized by a low volume in the valve. This enables us to achieve a high flow rate with low output. In the current version we have optimized the material access to avoid the formation of air bubbles.

  • Mixing head for up to 4 components (2 – 4 components or 1 purge air and 1 purge valve)
  • Air motor drive (electric motor possible)
  • different valve sizes possible
  • Expandable up to 8 components with an attachment
Categories :
Mixing heads (conventional connection)
4K mixing head for large recirculation
4K mixing head for large recirculation
Mixing head LC 5/4 Rezi

The LC 5 series is optimized for small quantities and is characterized by a low volume in the valve. This enables us to achieve a high flow rate with low output. In the current version we have optimized the material access to avoid the formation of air bubbles.

  • Mixing head for large recirculation for up to 4 components (2-4 components or 1 purge air and 1 purge valve)
  • Air motor drive (electric motor possible)
  • different valve sizes possible
  • large recirculation via the mixing head back into the container
Categories :
Mixing heads (conventional connection)
Mixing head LC 6 easy
Mixing head LC 6 easy
Mixing head LC 6 easy Rev. 01
  • Mixing head for up to 3 components
  • Electric motor for high output
  • for high viscosity A + B components
  • with easy to change ball valves
Categories :
Mixing heads (conventional connection)
Mixing head LC 7/3 for high viscosity components
Mixing head LC 7/3 for high viscosity components
Mixing head LC 7/3
Rev. 01
  • Mixing head for up to 3 components
  • Electric motor for high output
  • For high viscosity A and medium viscosity B components
  • Material friendly application
  • Preparation for temperature sensor, heating cartridge and pressure sensor
Categories :
Mixing heads (conventional connection)
Mixing head LC 8/2 for high viscosity components and a high output rate
Mixing head LC 8/2 for high viscosity components and a high output rate
Mixing head LC 8/2
  • Mixing head for 2 components
  • Electric motor for high output
  • for highly viscous A and B components (adhesive pastes)
  • 5 mm drive shaft
Categories :
Mixing heads (conventional connection)
Mixing head LC 9/3 for up to 3 components
Mixing head LC 9/3 for up to 3 components
Mixing head LC 9/3
  • mixing head for up to 3 components
  • Electric motor
  • for high viscosity A and medium viscosity B components
Categories :
Mixing heads (conventional connection)

Which mixers go with it?

Have a look at the suitable mixers for mixing heads with the conventional mixer connection (drive hook).

We are happy to advise you!

We place great emphasis on advice and service. If you are interested and have any questions about TARTLER mixing heads, please feel free to contact our experts at any time.

Markus Fesel

Technical Sales & Project Management
Phone: +49 (0)6061 9672-13
m.fesel@tartler.com

We are happy to advise you!

Markus Fesel

Technischer Vertrieb & Projektmanagement
Phone: +49 (0)6061 9672-13
m.fesel@tartler.com

Accessories & Variations

  • Flat Mixer Connection
    Flat Mixer Connection
    Accessories
  • Accessories for mixing ratio tests
    Accessories for mixing ratio tests
    Accessories
  • Metal safety pipe for mixer
    Metal safety pipe for mixer
    Accessories
Flat mixer connection
Flat mixer connection
Standard mixer connection
Standard mixer connection
Flat Mixer Connection

Easier cleaning e.g. for materials with short pot life

Categories :
Accessories
Mixing ratio test attachment
Mixing ratio test attachment
Mixing ratio test attachment
Mixing ratio test attachment
Mixing ratio test attachment
Mixing ratio test attachment
Accessories for mixing ratio tests
  • Closed union nut
  • Union nut to hold the mixer
  • Mixing ratio test attachments
Categories :
Accessories
Metal safety pipe for mixing nozzle without speed control
Metal safety pipe for mixing nozzle without speed control
Metal safety pipe for mixer nozzle with speed control
Metal safety pipe for mixer nozzle with speed control
Metal safety pipe for mixer
  • Closed union nut
  • Union nut to hold the mixer
  • Mixing ratio test attachments
Categories :
Accessories

Always up-to-date with the TARTLER news!