1K Meter and Dispense Machine for pasty components

  • Nodopox 1K
Nodopox 1K | 1K dosing unit / pumping station / barrel removal station

Nodopox 1K | 1K dosing unit / pumping station / barrel removal station

1K dosing system for pasty component out of cylindrical supplier drum

System for dosing pasty and high viscosity components made of silicone, polyurethane resin or epoxy resin - possible with vacuum-assisted follower plate deaeration or vacuum drum change.

Technical data

Applications Dosing and filling of high viscosity and pasty materials
Metering pump drive Frequency controlled electric motor or servo motor
Output Depending on equipment up to approx. 20 l / min, special versions possible
Control Control according to individual machine specification (start/stop, Siemens SPS, touch screen) stepless adjustment of dosing speed, pressure monitoring / pressure control possible
Tank Cylindrical containers: 20 l, 50 l, 100 l, 200 l drum
Power supply 400 Volt, 50 Hz
Additional equipment
  • Drum lifter
  • Barcode scanner
  • Housing
  • Scale
  • Vacuum supported drum change*
  • Vacuum drum change**
  • Handling arm

* The sink down of the following plate is a result of the extraction of air between the following plate and the material surface in the drum.

** We produce a vacuum between material surface in the drum and the following plate. The vacuum can be specified in the machine program. The sink down of the following plate is in a controlled way, and only if the specified vacuum is reached. -> absolutely NO introduction of air is coming into the process.