MDM – Meter Mix and Dispense Machines for liquid resins

  • MDM 3
  • MDM 4
  • MDM 5
  • MDM 6

MDM 3 | 2K Meter Mix and Dispense Machine

Dosing system for processing small quantities of liquid, two-component synthetic resins

Compact system for efficient processing of liquid synthetic resins made of polyurethane resin or epoxy resin with an output up to 0.7 l/min at MV 100:100 (depending on viscosity, mixing ratio and hose lengths).

Technical data

Applications
  • Silicone machining
  • Prototyp component fabrication
  • Electric-grouting
  • adhesive machining
  • laboratory use
Metering pump drive electrical actuator with steadier rotation speed
Mixing ratio depends on pump combination fix present
Output 0,7 ltr/min at MV 100:100Note our offer!
Control on/off switch
Tank Container connector for original Gebinde, orContainer 0,5 l / 0,75 l and 2 l (plastics),
3 l, 5 l, 10 l, 30 l or 60 l in VA possible
Compressed air Standard equipment without compressed air
Power supply 220 Volt, 50 Hz
Special voltage on request!
Hose length 1,5 m, 3 m, 5 m
Mixing head Static mixture
Additional equipment squirt intention

MDM 4 | 2K Meter Mix and Dispense Machine

Table-top device for processing small quantities of liquid, two-component synthetic resins

Compact system for efficient processing of liquid synthetic resins made of polyurethane resin or epoxy resin with an output up to 1.5 l/min at MV 100:100 (depending on viscosity, mixing ratio and hose lengths).

Technical data

Applications
  • Prototyp component fabrication
  • Electric-grouting
  • adhesive machining
  • RIM (resin injection molding)
  • laboratory use
Metering pump drive Frequency controlled electric motor
Mixing ratio 100:10 up to 10:100
depends on pump combination, adjustment via gear wheels
Output Pump combinations for the range from 0.05 to 1.5 l/min configurable (depends on viscosities and mixing ratio)
Control Output adjustment via potentiometer
Tank Various plastic containers from 0.2 l and stainless steel containers from 3 l available
Compressed air not necessary for standard machine
Power supply 230 Volt, 50 Hz
Hose length 1 m, special length on request
Mixing head LC 0/2 with built-in non-return valves and rotating disposable plastic mixer, driven via flexible shaft
MDM 5 | 2K Meter Mix and Dispense Machine

MDM 5 | 2K Meter Mix and Dispense Machine

Dosing system for processing small quantities of liquid, two-component synthetic resins

Compact system for efficient processing of liquid synthetic resins made of polyurethane resin or epoxy resin with an output up to 1.5 l/min at MV 100:100 (depending on viscosity, mixing ratio and hose lengths).

Technical data

Applications Prototyp component fabrication
Electric-grouting
Silicone machining
Laboratory use
Metering pump drive Frequency controlled motor or air motor
Mixing ratio 100: 10 up to 10: 100
depends on pump combinations
Output Max. 1.5 kg/min. at mixing ratio 100 : 100
Control With shotsize-timer
potlife-timer, output-regulating
by potentiometer
Tank 0.5 l / 0.75 l and 2 l (plastics), 3 l, 5 l
and special version 10 l, 30 l, 60 l, 100 l
in stainless steal possible
Tank heating available
Compressed air Standard 400 l / min, 6 – 8 bar
Spraying ca. 1000 l / min, 6 – 8 bar
Power supply 220 Volt, 50 Hz
Hose length 1,5 m, 3 m, 5 m
Mixing head LC 5 / 2, LC 5 / 3, LC 5 / 3 M, LC 5 / 4,
LC 5 / 4 R
Additional equipment Tank heating, heating hose,
continuously variable adjustment
mechanism for A-components,
spray intention
MDM 6 | 2K Meter Mix and Dispense Machine

MDM 6 | 2K Meter Mix and Dispense Machine

Dosing system for processing small quantities of liquid, two-component synthetic resins

Compact system for efficient processing of liquid synthetic resins made of polyurethane resin or epoxy resin with an output up to 3.5 l/min at MV 100:100 (depending on viscosity, mixing ratio and hose lengths).

Technical data

Applications Prototyp component fabrication
Electric-grouting
Adhesive machining
Laboratory use
Spray uses
Metering pump drive Frequency controlled electric motor
Mixing ratio 100: 10 up to 10: 100
depends on pump combinations.
Adjustment by stepless gear box
by display for B-pump
Output Up to 3.5 kg/min at mixing ratio 100 : 100
Control Shot size timer, potlife-timer,
big or small circulation of the components,
flow rate adjustment
over potentiometer
Tank 3 l, 5 l, 10 l, 30 l, 60 l or 100 l in stainless steel
Tank heating Possible
Compressed air Standard 400 l / min, 6 – 8 bar
Spreaying ca. 1000 l / min, 6 – 8 bar
Power supply 380 / 415 Volt, 50 Hz
Hose length 1,5 m, 3 m, 5 m; heating possible
Mixing head LC 5 / 2, LC 5 / 3 , LC 5 / 3 M, LC 5 / 4,
LC 5 / 4 R, LC 6 / 2 or LC 6 / 3
Additional equipment Continuously variable adjustment
mechanism for A-components, spray
intention, automatic refill of the 30 l, 60 l
or 100 l material container