Innovative alternatives for small(est) quantities

High efficient small-quantity processing of synthetic resins

Innovative alternatives for small(est) quantities

TARTLER enables the highly efficient small-quantity processing of synthetic resins 

We offer four different system solutions for the processing and application of small and very small quantities of liquid two-component synthetic resins. Users in product development prototyping, electro casting, adhesive application and RIM applications in particular will thus be able to find a number of alternatives for the efficient dosing and mixing of silicones, polyurethanes and epoxy resins. 

 

For all those minimal-quantity users of synthetic resins with pneumatic dispensers who want to move away from hand mixing, our LC-DCM dispenser attachment represent a highly elegant and cost-efficient solution. That is because this attachment is equipped with a universal connection point for a number of manual cartridge systems commonly available on the market and enables – and this is by no means a given – the dynamic mixing of resin and hardener. In practical terms, this means the LC-DCM offers small-quantity users the quality advantages of the dynamic 2K dosing / mixing technology known from industrial series production. In other words: anyone who processes cast resins and adhesives for repairs, reworks or optimising surfaces and uses the multi-component or double cartridge pistols from Nordson, Sulzer, Ritter or other manufacturers and docks on the LC-DCM from TARTLER can now look forward to homogenous mixing and impressive output. 

Manual but dynamic – cartridge dispenser attachment LC-DCM

Depending on the material combination, the small-quantity user can achieve a volume discharge up to 80 per cent higher with the LC-DCM than when using one of the static mixers offered by the cartridge or material manufacturer at the same configuration and pressure. Our dispenser attachment was developed specially for extreme mixing ratios and high-viscosity differences in the materials. As a result, it yields significant benefits for all synthetic resin and adhesive processors who need to apply small quantities in even volume flows and need to use the same materials in reworks as in series production while achieving optimal mixing quality. 

 

Entry to mechanical 2K processing

An entry-level solution for small-quantity processors who want to move from manual to mechanical dosing and mixing of liquid polyurethanes and epoxy resin is the MDM 4 table machine in our product range. After a thorough re-engineering, this compact system is now designed in such a manner that the combination of the pumps can be configured for output levels from 50 to 800 ml/min – depending on the mixing ratio and viscosity of the components. The MDM 4 makes it possible to achieve dosing ratios from 100:10 to 10:100 and the output is controlled by a potentiometer. The mixing head is a slim LC 0/2 from TARTLER. It is equipped with a rotating disposable mixer that is driven via a flexible shaft by a frequency-controlled electro motor. When selecting the containers for the A and B components, the user can choose between containers of 0.5 to 100 l. A 220 V connection is all that is required to put it into operation.

Casting, spraying, foaming

The next biggest sister model is the MDM 5. It has a variable output level of 0.05 to 1.5 l/min, while offering more functions and a Siemens Logo control system with useful features such as shot time pre-selection and a pot time alarm. The machine can be equipped with various container sizes, electrical stirrers, as well as heating units for containers, hoses and the mixing head. The selection from various mixing heads in TARTLER’s product range provides additional freedom. In the MDM 5, small-quantity users will find a stationary or mobile machine for casting, spraying and foaming. In addition to a 220 V connection, a compressed air supply (6-8 bar) is also required to put it into operation.

Finally, the top-of-the-range model – the MDM 6 – offers even more functions. It is designed for maximum outputs of 3.5 l/min, can be equipped with containers with a volume from 3.0 l to 100 l, and can equally be used for casting, spaying and foaming. It also offers additional functions – for example, a small and large recirculation of the components.

 

Automation before your eyes

With the LC-DCM dispenser attachment and its MDM product range, we offer multiple innovation solutions for the dosing and mixing of small quantities of liquid polyurethane and epoxy resins. The plant manufacturer thus bridges the gap for many users to the next higher dimension of synthetic resin processing. While the LC-DCM is the perfect replacement for hand mixing, the MDM 4 represents the entry to mechanical 2K dosing and mixing technology. Building upon this foundation, the MDM 5 and the MDM 6 in particular bridge the gap to the large multi-component systems of TARTLER’S NODOPUR series, which can also be equipped with volume flow control and numerous other options.MDM6

Zurück