Nodopur VS
Two component meter mix and dispense machine
for efficiant application of liquid synthetic resctive resin materials
such as polyurethane and epoxi resins
Download
Applications Prototyping
Electro-grouting
Adhesive applications
RTM (Resin Transfer Molding)
Laboratory applications
Spraying applications
Production- or series-production,

Liquid PU-Paste machining
Metering pump drive Frequency regulated electro motor 0,37 till 2,2 kW
Mixing ratio automatic regulation through flow rate measurement for components.

100:10 till 100:100 depending on pump combination
Special version possible

Adjustment: Mixing ratio thru input by device
Output up to 50,0 l/min. at MV 100 : 100 possible

depending on pump combination at range 1:10 adjustable

Note our offer!

Adjustment: continuously adjustable at the computer
Control

Siemens SPS with Control panel at control desk for monitoring and regulation all machining- and processparameter.

Shoot masses preselection, pot life alarm, automatic Pot life flushing with A-Component and B-Component, intermediate shot or scavenging air selectable, scavenger as option available

big or small recirculation of the components
Container 3, 5, 10, 30, 60, 100 l possible
Container heater electric or water / Oil tempering possible
Compressed air Casting ca. 650 l / min, Syringe ca. 1000 l / min
6 – 8 bar
Power supply 380 / 415 Volt, 50 Hz depending on equipment;
special voltage on request.
Tube length 3 m, 5 m, 10 m, heating possible; special length
Mixing head LC 5/2, LC 5/3, LC 5/4, LC 5/4 R,LC 6/2,LC 6/3
Drive: air motor or electro drive for the dynamic static mixer in different sizes
Additional equipment Multi-component plants possible,

Container heating, tube heating, Spraying resolution, autom. refill of the materialcontainer 30 l, 60 l or 100 l container
Handling arm with 1,65 mtr.

  Subject to technical changes without prior notice.