Nodopur B 1000
Two component dose and mix machine
for efficiant application of liquid synthetics from
polyurethane and epoxi resins.
Download
CL 52 B 60
Applications

Prototyp component fabrication,
Adhesive processing,
RTM (Resin Transfer Molding),
repetition part-fabrication,
Electric grouting,
Spraying applications,
Production- or series-production
Metering pump drive Frequency regulated electric motor 0,37 till 2,2 kW
Mixing ratio 100:10 till 100:100 depends on pump combination
special versions possible

Adjustment: mixing ratio with input in control
Output up to 100 l/min. at MV 100 : 100 possible (Output depends strongly on viscosity of the A and B component in the free inlet!)

Depending on pump combination at range 1:10 adjustable

Note our offer!

Adjustment: With Poti or thru input control continuously adjustable.
Control Siemens SPS with control panel at control desk

with Shoot masses preselection, pot life alarm,

big or small recirculation of the
components
Container 3 l, 5 l, 10 l, 30 l or 60 l as surge tank / puffer container possible
Container heater possible
Compressed air Casting: 6500 l/min, Syringes: ca. 1200 l/min

6 – 8 bar
Power supply 380 / 415 Volt; 50 Hz
special voltage on request
Tube length 3 m, 5 m, on special request
Mixing head LC 5/2, LC 5/3, LC 5/4, LC 5/4 R, LC 6/2 or LC 6/3
Actuation: air or electric drive for the dynamic static mixer in different sizes
  Specials Tank-heating, tube heating, spray-equipment, mixing head hanging, Vacuum-degassing, automatic container refill, Connector for 200 l barrels or 1000 l container possible.
Additional equipment volume electricity control with Siemens SPS. Control panel at control desk for monitoring and regulation all machining- and processparameter.

Shoot masses preselection, pot life alarm, autom. Pot life flushing mit A-Component, B-Component, intermediate shot or scavenging air selectable, scavenger as option available
Handling arm with Ausleger 1.65 meter
  Subject to technical changes without prior notice.