Mixer Portfolio

Mixer – Self-cutting connection

New “applied for patent” mixer connection for rotary plastic mixers. With this mixer connection the full and part automation of the mixer change for metering and mixing machines is possible.

Mixing nozzle 13/12 DHT

Mixing tube with hose connection 13/12 DHT – for hoses with inside diameter 9 mm and 13 mm. Available mit segmentierter unterbrochener Spirale A.) without speed control (13/12 DT), B.) with speed control at the material inlet (13/12 DIMT), C.) with speed control at the material outlet (13/12 DIMHT) with segmented interrupted spiral for a strongly performed mixing of the components

Mixing nozzle 22/06 DIS

One way mixer 22/06 DIS with segmented interrupted spiral for a strongly performed mixing of the components, with special retaining ribs for a safe hose connection, with speed control sensor
*** Specal for Tooling-Applications ***

Mixing nozzle 35/08 DIS

One way mixer 35/08 DIS with segmented interrupted spiral for a strongly performed mixing of the components, with special retaining ribs for a safe hose connection, with speed control sensor
Higher output for the application of glue paste e.g. in the production of wind blades
– Lower rotation speed of the mixer rewquired at a better mixing impact
– Lower abrasion of the mixhead drive

Mixing tube 35/08 DHS

Mixing tube 35/08 DHS with special retaining ribs for a safe hose connection of hoses mit inner diameter of 32 mm;
available with segmented interrupted spiral for a strongly performed mixing of the components
and a lower abrasion of the mixhead drive

Holder for mixing nozzle for mixhead LC 6 

Old version (on the left in the photo): LC6 13/12 D – You have to clean the coupling nut
New version (on the right in the photo): LC6 13/12 DLC6 – No cleaning of the coupling nut with the new mixing nozzles

Overview mixer assortment 

Tartler GmbH produces their own static dynamic mixers with own tools on the injection moulding machine of a local partner.

Static Hose Mixer 24/08 and 18,5/08

Static mixing element made of PP for 25 mm application hose

Issue:

Mixed material flows from the mixing head into the application hose. Depending on the length of the hose or due to a high flow rate, there is a risk that the material will be seperated again.

Solution:

Our Hose Mixer ensures a static re-mixing directly in the hose. The Material will be mixed and homogenised again, shortly before the output.

 

Available until now: Hose Mixer 18,5/08
Hose Mixer for DN 19 / product no. 18,5/08
Hose DN 19 / product no. EK20-1597
Hose clamp DN 19 for 22 mm mixer / product no. EK20-0780

New Product now: Hose Mixer 24/08
Hose Mixer for DN 25 / product no. 24/08
Hose / product no. EK20-1598
Hose clamp DN 25 for 22/35 mm mixer / product no. EK20-0781